Original Saucers

All these rockets ascend rapidly. At apogee they flip over and glide down slowly and safely using aerobrake recovery. There is no complicated recovery system to fail. The fins are Basswood and the Saucer Section is 110 lb Card Stock. Engine hooks are used on the 6" and 7.25" saucers for positive engine retention. Engine hooks are not used on the 10.25 inch flying saucers so that many different motors can be used. The White flying saucers are bright white for easy decorating and finishing. All other styles are preprinted with all decals and decorations, NO painting or detailing is necessary.  These kits are intended for the rocketeer looking for a new challenge and something out of the ordinary. With their high visibility and slow ascent and recovery, they are real crowd pleasers. NO long walks to recover your rocket either, even on a windy day. .  Available colors are white, stars & stripes, USAF, fluorescent green, orange, yellow or pink.

18mm Original Saucer

Diameter: 6.0 inches
Height: 3.0 inches
Weight: 0.5 oz.

Recommended motors:
A8-3, B4-2. B4-4, B6-0, B6-2, B6-4, C6-0, C6-3,
Aerotech 18mm Single Use and RMS 18/20 reloads

24mm Original Saucer

Diameter: 7.5 inches
Height: 3.0 inches
Weight: 0.9 oz.

Recommended motors:
C11-0, C11-3, C11-5, D11-P, D12-0, D12-0, D12-5, E9-P, E9-4,
Aerotech 24mm Single Use or RMS 24/40 reloads

29mm Original Saucer

Diameter: 10.25 inches
Height: 3.25 inches
Weight: 1.5 oz.

Recommended motors:
Aerotech 29mm Single Use or RMS 29/40-120 reloads